Things to know before using LED dimmers

If you are looking to buy a regulator LED rasvjeteit is recommendable to keep some things in mind. Else, you would end up getting the wrong controller that is of no use to your LED lamps. Some of these things are as follows,

Dimming method

There will be several types of LED and lights, and you will need specific types of dimming technologies to control these lights. So, the dimming or controller manufacturers have come up with a variety of regulators for each type of light. The broader categories of these methods are mains dimming, Dali, and DMX. If you know which method to use for your LED light. You can check the types of products that you can dim using these regulators by the manufacturers’ manuals.

Cheap dimmers will not work.

You could get a lot of low-quality LED controllers that could fail or make your LED system fail at times. So, you have to check for the quality of the product instead of looking at its cost. If you fall for the low cost of these controllers, their protocols will not match with your LED lights and hence, you will end up wasting your money. So, you have to check and compare two or more controllers. Then, you could find the right controller for your LED.

Testing is required

There are no standards for the manufacturing of LED lamps and controllers. So, you could not buy an LED controller and use it on your light. At most times, it will not work. For each lamp, it is necessary to check for the proper functioning of the controller when you buy it from a manufacturer. For instance, a controller with a designation of retrofit will not act like one. It is also tedious to compare two similar products. So, you should take the lamp you have to control along with you when you are about to buy a lighting controller.

Use dimmers specific for LEDs

If you ask for an electrical light dimmer, you will get a controller of ordinary tungsten load lamps. These lamps will not identify the light emitted from an LED as their electrical loading will be far below that of the tungsten lamps. If you go with the ordinary dimmers, you would have to apply extra electrical load. It will lead to high electric costs and consumption. So, you have to check for the controllers that are meant for LED lights that will identify the light from them.

Check for proper fits.

If you are buying an electric light controller, you have to check whether it fits with the intended lamp correctly. Most controllers will not match with your LEDs although they are retrofits. So, you have to check it beforehand.

Buy from brands

If you want to make a worthy purchase, it is recommendable to go with a reputable brand. Only the products from these brands will offer high-quality and validity. Your money will not go to waste if you do so.

Comments are closed.